The planning service parameter was not specified or is not one of the configured locations

Product:

Cognos Tm1 10.2.2 fix pack 7

http://www-01.ibm.com/support/docview.wss?uid=swg24043388

Cognos BI 10.2.2 fix pack 8

http://www-01.ibm.com/support/docview.wss?uid=swg24043468

Microsoft Windows 2012 R2 server

Microsoft SQL server 2014

Symptom:

Cannot login to TM1 application web when surf to http://tm1test:9510/pmpsvc

Error message

“The planning service parameter was not specified or is not one of the configured locations”

Cause:

The value you use in fpmsvc_config.xml file for <external uri=”http://tm1test:9510″/>

Must exist in file E:\Program Files\ibm\cognos\c10_64\webcontent\planning.html

// Update the following to point to the location of the planning service(s)

var planningServices = [“http://tm1test:9510″,”http://tm1serversnames:9510”];

Below from other website;

Solution, the steps to setup cam authentication:

To configure TM1 Web and Performance Modeller / Planning Service to use CAM Authentication and Single Signon.

Configuring TM1 Web

By default the URL for TM1Web is http://mytm1server:9510/tm1web.

This works by default with the default installation, however, if your TM1 Server is configured to use CAM Security (IntegratedSecurityMode 5) rather than Native (IntegratedSecurityMode 1) then you will hit issues trying to access it.

To configure TM1Web to use CAM Secured Servers do the following:

STEP 1 – Create the variables_tm1.xml file

This file links BI to the TM1Web Interface using CAM Authentication. Simply make a copy of the file variables_tm1.xml.sample in the BI Server installation directory …\templates\ps\portal and call it variables_tm1.xml. Edit the file to include your tm1server. The file can contain a NETBIOS and FQDN value to ensure it works in all circumstances.

<?xml version=”1.0″ encoding=”UTF-8″?>

<!–

IBM Confidential

OCO Source Materials

BI and PM: tm1fragments

The source code for this program is not published or otherwise

divested of its trade secrets, irrespective of what has been

deposited with the U.S. Copyright Office.

–>

<!–

This file is referenced by the tm1s.cfg file when using CAM authentication. The “localhost” string should be replaced with the name of the server running TM1Web. For java tm1web, the tm1web.html is accessed when the standalone tm1web uses cam authentication.

–>

<urls>

<url is-regex=”true”>http://tm1test/TM1Web(/\([aAsS]\([A-Za-z0-9]+\)\))?/TM1WebLogin.aspx</url>

<url is-regex=”true”>http://tm1test/TM1Web(/\([aAsS]\([A-Za-z0-9]+\)\))?/TM1WebLoginHandler.aspx</url>

<url is-regex=”true”>http://tm1test/TM1Web(/\([aAsS]\([A-Za-z0-9]+\)\))?/TM1WebMain.aspx</url>

<url is-regex=”true”>http://tm1test:9510/TM1Web(/\([aAsS]\([A-Za-z0-9]+\)\))?/UrlApi.jsp(\?.*)?(#.*)?</url>

</urls>

</cookies>

</CRNenv>

STEP 2 – Add CAMPortalVariableFile to tm1s.cfg

Next you need to add the reference to the variables_tm1.xml file into your TM1 Server and connect BI authentication if it is is not already in place.

Open your TM1 Servers tm1s.cfg file and add/amend the following lines to it.

IntegratedSecurityMode=5

ServerCAMURI=http://mybiserver:9300/p2pd/servlet/dispatch

ClientCAMURI=http://mybiserver/ibmcognos/cgi-bin/cognosisapi.dll

ClientPingCAMPassport=900

CAMPortalVariableFile=portal\variables_TM1.xml

Remember, if your BI Gateway is using CGI and not ISAPI then use cognos.cgi not cognosisapi.dll.

STEP 3 – Configuring TM1Web Main Page

The next step is to configure TM1Web and to avoid service errors when accessing TM1Web. To do this you edit the tm1web.html file in the BI Install Location\webcontent\tm1\web directory.

Open file E:\Program Files\ibm\cognos\c10_64\webcontent\tm1\web\tm1web.html in notepad.

The following change need to be made:

Change the var tm1webServices variable to use references to your TM1 Server as below.

// Update the following to point to the location of the TM1Web service(s)

var tm1webServices = [“http://tm1test:9510”];

STEP 4 – Modify the TM1Web Configuration to choose Admin Server

To modify the TM1Web front page to automatically select an admin server and TM1 Server modify the file tm1web_config.xml in directory

TM1 install location\webapps\tm1web\WEB-INF\configuration.

Change the following arguments to select defaults:

<!– If set, users will not be asked to enter Admin Host during login. –>

and optionally

<!– If set, users will not be asked to select a TM1 Server to connect to during login. –>

When complete, save the file and restart the ‘TM1 Application Server’ windows service for the changes to take effect.

Testing TM1Web

To test TM1Web simply go to http://mytm1server:9510/tm1web and you should be prompted to select from a list of available TM1 Servers. Once you have selected the TM1 Server you will be prompted for appropriate Native or CAM Security before being presented with the TM1 Cube View screen.

TM1 Architect

Before you start TM1 Architect the first time adjust this file E:\Program Files\ibm\cognos\tm1_64\bin64\tm1p.ini to have values for CAM.

[TM1]

DataBaseDirectory = ..\samples\tm1\PData

AdminHost =

ConnectLocalAtStartup = F

LocalServerNetworkProtocol = tcp

IntegratedLogin = F

AdvancedRulesEditor = F

AllowImportCAMClients = T

CognosGatewayURI = http://myBIserver/ibmcognos/cgi-bin/cognosisapi.dll

Language=eng

This file is copied to your windows user’s profile when you start TM1 architect the first time – the file cannot be changed in the user profile when the TM1 Architect program is running.

C:\Users\%username%\AppData\Roaming\Applix\TM1\

Steps to configure TM1 Performance Modeller

In order to configure Performance Modeller to function correctly with CAM secured TM1 Servers we need to perform some configuration work.

The steps required are as follows:

STEP 1 – Add required parameters to support Performance Modeller models.

These parameters and settings need to be added or modified in the TM1 Server tm1s.cfg file and the TM1 Server windows service restarted.

ServerCAMURI=http://mybiserver:9300/p2pd/servlet/dispatch

ClientCAMURI=http://mubiserver/ibmcognos/cgi-bin/cognosisapi.dll

ClientPingCAMPassport=900

CAMPortalVariableFile=portal\variables_TM1.xml

DistributedPlanningOutputDir=tunit

ForceReevaluationOfFeedersForFedCellsOnDataChange=T

AllowSeparateNandCRules=T

Some of the above will already have been added to the configuration file if you have previous configured TM1Web.

STEP 2 – Modify the Service Configuration file

Modify the fpm_svc.config file on the TM1 Server. The file resides in the TM1 installation location webapps\pmpsvc\WEB-INF\configuration directory. Stop the TM1 Application server service BEFORE editing this file.

Only the marked arguments need to be completed / corrected:

<?xml version=”1.0″ encoding=”UTF-8″?><fpm_config xmlns:xsi=”http://www.w3.org/2001/XMLSchema-instance” xsi:noNamespaceSchemaLocation=”fpmsvc_config.xsd”>

</service>

<tm1>

<gateway uri=”http://mybiserver/ibmcognos/cgi-bin/cognosisapi.dll”/>

<alternate_gateway_uris>

<alternate_gateway uri=”*”/>

</alternate_gateway_uris>

<dispatcher uri=”http://mybiserver:9300/p2pd/servlet/dispatch”/>

<admin_host name=”mytm1server”>

</servers>

</admin_host>

</tm1>

<!–

The Cognos Insight publish feature enforces a set of minimum system requirements that are required to perform a publish. These are requirements on the system running the TM1 Applications service where the new TM1 servers will be created. To change these system requirement settings add the <insight_publish> element.

maximumCDDDataMB – The maximum amount of TM1 data that can be sent in a publish request

maximumTM1ServersAllowed – The maximum number of servers that can run on this machine. This is the maximum number of servers that are registered with the tm1Admin service.

minimumFreeDiskSpaceMbRequired – The amount of disk space that must be available on the drive where the Tm1 data is published.

minimumFreeDiskSpaceMbRequired – The amount of free memory that must be available on the publish server.

–>

<!–

<insight_publish enabled=”true” maximumCDDDataMB=”100″>

<system_requirements maximumTM1ServersAllowed=”10″ minimumFreeDiskSpaceMbRequired=”5000″ minimumFreeMemoryMbRequired=”500″/>

</insight_publish>

–>

<!– If low on disk space you can set a different drive for the published TM1 server data as an alternative to reducing minimumFreeDiskSpaceMbRequired –>

<!–

<insight_publish enabled=”true” maximumCDDDataMB=”100″>

<system_requirements maximumTM1ServersAllowed=”10″ minimumFreeDiskSpaceMbRequired=”5000″ minimumFreeMemoryMbRequired=”500″/>

</insight_publish>

–>

<insight_publish enabled=”true”/>

</fpm_config>

By default, they will be pointing to localhost, you can also change these in Cognos Configuration IF you have NEVER configured TM1 Application Server to run with a Native secured TM1 Server. Inside Cognos Configuration at TM1 Applications Server at Component Properties you find the External Server URI to change.

By checking this file and adding your Gateway and Dispatcher URI’s you will guarantee the correct settings are in place.

Changes in Cognos Configuration can overwrite any manual updates to the config file.

STEP 3 – Install and modify the BI Interoperability software

You have a single ZIP file called bi_interop.zip that resides in a bi_interop directory of the TM1 installation directory (E:\Program Files\ibm\cognos\tm1_64\bi_interop).

Copy this file and expand it into the BI installation directory. This places files in the following directories within the BI installation:

Variables_plan.xml in \templates\ps\portal
Planning.html in webcontent
Pmhub.html in webcontent
Icon_active_application.gif in webcontent\icd\feeds\images
Icon_active_application.gif in webcontent\ps\portal\images

STEP 4 – Modify the BI Interoperability HTML Files

The two html files extracted into the Webcontent directory need to be modified as follows:

Change in E:\Program Files\ibm\cognos\c10_64\webcontent\planning.html

// Update the following to point to the location of the planning service(s)

var planningServices = [“http://mytm1server.domain.com:9510″,”http://tm1test:9510”];

Change in E:\Program Files\ibm\cognos\c10_64\webcontent\pmhub.html

// Update the following to point to the location of the pmhub service(s)

var pmhubURLs = [“http://tm1test:9510″,”http://mytm1server.domain.com:9510”];

Testing Performance Modeller

Now the configuration is complete, restart the TM1 application server service to read all the new parameters and test access to the application through the URL http://mytm1server:9510/pmpsvc

If successful your browser will return a blank applications window.

Click the Open Performance Modeller button on the toolbar. This can take some time to open first time, PM will look for TM1 Servers that have the correct security and parameters. If more than one are found you will be prompted to choose and then Performance Modeller opens.

Firewall

In some cases, you need to open following ports in the local Windows Firewall on the server to make it Cognos Tm1 work:

80,9300,9510,5495,5498,12345,12346

Plus ports for your TM1 applications instances.

Memory

In Cognos BI Configuration it is recommended to adjust the memory for java to the function of the BI server

Maximum memory for WebSphere Liberty Profile in MB 1024 change to 4096.

Cognos Configuration TM1 Applications server – component properties – Maximum memory in MB 768 change to 4096.

http://www-01.ibm.com/support/docview.wss?uid=swg21669247

https://www.ibm.com/support/knowledgecenter/SSEP7J_10.2.2/com.ibm.swg.ba.cognos.c8pp_inst.10.2.2.doc/c_installs_verify_ram.html

The values depend on your server hardware and what the users will do and how many they are.

Timeout

When using IBM® Cognos® TM1® Applications with IBM Cognos Business Intelligence security, set the pmpsvc session timeout to a value higher than the CAM session timeout to ensure the proper timeout detection. If the Cognos TM1 Applications (pmpsvc) session timeout is set to a value lower than the Cognos BI security (CAM) session timeout, then Cognos TM1 Applications will not properly detect a CAM session termination and will not timeout.

The timeout for TM1 default is 60 minutes in Cognos Configuration – TM1 Applications server – components properties at session timeout (min). Set to a good value calculated to fulfill the requirements.

Can also be changed in the file, Navigate to the fpmsvc_config.xml file in the following location: TM1_install_location\webapps\pmpsvc\WEB-INF\configuration.

Update the default value to a desired time, default is, <session timeout=”60″/>.

Inside tm1s.cfg you can adjust the value of ClientPingCAMPassport, default is

ClientPingCAMPassport=900. Change ClientPingCAMPassport to a good value.

On your Cognos BI system, configure the CAM session timeout using IBM Cognos Configuration.

Enter a value in the Inactivity timeout in seconds’ field in the Security/Authentication section of Cognos Configuration. Set to 10800 seconds to get 3 hours or other good value.

Click BI Configuration > Servlet Gateway > IBM Cognos Servlet Gateway.

Notice the Ping timeout in seconds value. Default 240 seconds is 4 minutes.

Verify that the Ping timeout in seconds and Inactivity timeout in seconds settings in BI Configuration are set the same, and that they are lower than the session timeout setting in the fpmsvc_config.xml file and twice as much as the ClientPingCAMPassport value in the tm1s.cfg file.

Adjust the IIS to have the same value in all timeout positions.

I am Not sure if above is correct about timeout values – please test in your dev Cognos environment first.

Cognos BI DUMP files

If you prefer you can disable the creation of these files by amending a configuration file as below:

On the server where IBM Cognos BI is installed, open the cclWinSEHConfig.xml file from the c10_location\configuration directory.
In the configuration element, change the value of the environment variable setting to 0 (zero) so that it reads <env_var name=”CCL_HWE_ABORT” value=”0″/>

III. Save the file.

Repeat the above steps for any other server(s) that could potentially run reports.

Text copied from this sites:

https://allthingscognos.wordpress.com/

https://www.ibm.com/support/knowledgecenter/en/SSMR4U_10.2.2/com.ibm.swg.ba.cognos.express_migration.10.2.2.doc/c_express_inst_mig_trouble_tm1_timeout.html

http://www-01.ibm.com/support/docview.wss?uid=swg21637849

CogKnowHow

Just another WordPress site

The planning service parameter was not specified or is not one of the configured locations